Authority for Justice and Consumer Protection
Ensuring operational safety - apply for permission to set up and operate gas filling systems
If you want to build or operate a gas filling system or make certain changes to the design or operation that affect the safety of the system, you must apply for a permit from the responsible authority.
Important notes
Prerequisites
- The system for which you are applying for permission must be a system that requires permission.
- You must build and operate filling stations using state-of-the-art technology.
- Your documents must be complete, plausible and meaningful.
- The test report from the approved monitoring body (ZÜS) must confirm that the system applied for can be operated safely if the measures specified in the documents, including the tests, are adhered to.
Documents required
Informal application with the following information:
- Last name, first name, company name
- Applicant's address
- Contact information (email, telephone, fax)
- The type of permission you want:
- Construction and operation
- Modification and operation
- Partial permission
- Indication of the operating location
- Subject of the application
- Description of the facility
- Description of the system technology and interaction with other systems
- Piping and instrument flow diagram (P&ID flow diagram)
- Safety data sheets
- Description of operation
- Permanently occupied position when operating without supervision
- Overview plan
- Site plan
- Floor plan/technical plan
- Ex zone plan
- Explosion protection concept
- Fire protection information
- Calculation of manufacturing costs
- Other facilities
- Test report from an approved monitoring body (ZÜS). The test report must confirm that the system can be operated safely if the measures mentioned are adhered to.
Please note
The application documents can also be submitted in digital form.
Deadlines
The permission expires if:
- you have not started construction of the facility within two years of the permit being granted,
- You have interrupted the construction of the system for two years or longer
- You have not operated the system for a period of three years
Procedure & Fees
Procedure
- Submit the application for approval of the system requiring monitoring with the necessary documents, including the test report from the approved monitoring body (ZÜS), to the responsible authority.
- If there is a requirement for approval under the Federal Immission Control Act, you will receive the application documents back, as a permit under the Industrial Safety Ordinance will then be checked as part of the necessary approval under the Federal Immission Control Act.
- The responsible authority will make its decision after review and communicate it to you.
Processing time
The competent authority must decide on the application within three months of receiving it.
Fees
Fees are charged for processing the permit application in accordance with the fee schedule for the areas of occupational safety and plant and product safety (ArbSchGebO HA).
The amount of the fee depends on the time required to review the application documents and prepare the permit.
Legal notes
Legal remedies
contradiction:
- You can object to the decision within one month of notification.
- You must submit the objection to the competent authority in writing or for the record.
Legal basis
§ 18 (1) No. 3 Industrial Safety Ordinance (BetrSichV)
LV 49 - Explanations and instructions for carrying out the approval procedures in accordance with Section 18 of the Industrial Safety Ordinance
Service description
At gas filling systems, land, water and aircraft vehicles are filled with flammable gases, which are then used as fuel. Gas filling systems are systems that require monitoring.
You need permission from the relevant authority if you:
- would like to build and operate a gas filling system
- want to make changes to the design or operation that affect safety
- limited
- limited
- under conditions
- with conditions
Address and contact information
Postal address
Authority for Justice and Consumer Protection
Plant Safety
Postfach 30 28 22 20310 Hamburg
Send email
Facility info
Only mail can be sent to PO Box 30 28 22. Please send parcels to Billstraße 80, 20539 Hamburg instead.